Data still to be completed------(Home)
PRODUCT DATA of Solithane 113/C 113-300 (100/73 pbw)
MaterialSolithane 113/C 113-300 (100/73 pbw)
Product TypeTwo-part, soft, transparent, potting, conformal coating, bonding agent.
Chemical CompositionPolyurethane
Name of ManufacturerUniroyal Chemical Company Inc
(Crompton Corporation), 214 West Ruby Avenue,, Gastonia NC 28053, USA
+1 704 864-3411
+1 704 864-4079
bob_marionneaux@cromptoncorp.com
www.cromptoncorp.com
EXPERIENCE IN PRACTICE
Development StatusCommercial Product
Cost RangeLow
Lot ReproducibilityExcellent
Space ExperienceExtensive
PHYSICAL PROPERTIES
Specific Gravity1.07
Viscosity20000 cP @ 27°C
Pot Life180 min @ 27°C
ELASTIC PROPERTIES
Tensile Modulus0.004 GPa
Remark:Room temperature data from Cryogenics 48 (2008) 497-510
Data Quality: Limited Laboratory testing
ELECTRICAL PROPERTIES
Electrical Volume Resistivity2.5e12 ohm.m @ 27°C
Dielectric Constant4.2 @ 27°C, 1kHz
Dielectric Strength14.9 @ 27°C
Dissipation Factor0.162 @ 27°C, 1kHz
THERMAL PROPERTIES
Thermal Expansion Coefficient238 μstrain/°C
Remark: 0°C to 70°C 126 x 10-6 /°C for -55°C to -15°C
Glass Transition Temperature-10 °C
Remark: Thermal expansion measurement
RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY
FlammabilityFail (21% O2)
Test: NASA NHB 8060-1B
Thermal CyclingPass
Test: ECSS-Q-70-04
Temperature Range(space)-60°C to 120°C max.
Test: Long Term
Outgassing(Avg data)TML = 0.37%, RML =0.21%, CVCM = 0.01%
Test: ECSS-Q-70-02
Oxygen Index24.7
Test: ECSS-Q-70-21
Ionising Radiation10 Mrad
Test: Manufacturer’s Data
SPECIAL RECOMMENDATIONS
Special RecommendationsRecommended cures: 7 days at room temperature, or 24 hours at 70°C. · Compositions other than the one detailed here are possible. Large amounts of experimental data on them exists and is available on demand. · Not resistant to solar UV radiation. · Owing to flammability risk, not to be used as a conformal coating in manned spacecraft unless a fire-resistant overcoating is used. It’s acceptability as an adhesive will depend on the configuration. · Possible use as a screw-locking compound. · Possible use as an ink with suitable addition of pigments and solvents. · Possible use as a conductive coating when filled with silver powder. · Flammability highly dependent on coating thickness. Configuration flammability tests required.